IHTM PLAVI
University of Belgrade
Institute of Chemistry, Technology and Metallurgy
National Institute of the Republic of Serbia

grb BUUniversity of Belgrade

Biljana Bobić, Ph.D.

Associate Research Professor

 

 

 

 

Address: University of Belgrade, Scientific Istitution Institute of Chemistry, Technology and Metallurgy –National Institute,
Department of Electrochemistry, Karnegijeva 4, Faculty of Technology and Metallurgy, IIIrd floor, room 338d, 11120 Belgrade 35, PAC 135804, Serbia Telephone: +381 11 3370 389
Fax: +381 11 3640 234
GSM: +381 062 8244 700
E-mail: Biljana.Bobic@ihtm.bg.ac.rs
            biljanabobic@gmail.com

 

Education:

1979 B.Sc, University of Belgrade, Faculty of Technology and Metallurgy
1984 M.Sc, University of Belgrade, Center for Multidisciplinary Studies
2011 Ph.D, University of Belgrade, Faculty of Technology and Metallurgy

Research Ranks:

2008 Research Assistant
2012 Assistant Research Professor
2018 Associate Research Professor

Memberships:

Serbian Chemical Society
Serbian Welding Society

Professional Experience:

1982 – 1983 University of Belgrade, Faculty of Pharmacy
1983 – 2005 Military Technical Institute, Belgrade
2006 – 2012 Science and Technology Park IHIS, Belgrade, Zemun
2012 – 2013 Institute GOŠA, Belgrade
2013 – University of Belgrade, Scientific Istitution Institute of Chemistry, Technology and Metallurgy –National Institute, Department of Electrochemistry

Awards and Honors:

2013 Golden medal. I. Bobić, B. Bobić, M. Babić, A. Vencl, S. Mitrović, Razvoj tehnologije dobijanja domaćih čestičnih hibridnih kompozita A356/SiC+grafit, sa osnovom od aluminijumske legure, 33. Međunarodna izložba pronalazaka, novih tehnologija, industrijskog dizajna Pronalazaštvo–Beograd 2013, Belgrade, Serbia, 22-29 May 2013

2013 Silver medal. Ilija Bobić, Biljana Bobić, Miroslav Babić, Aleksandar Vencl, Slobodan Mitrović, Development of Domestic Hybrid Composites, A356/SiC/GrP, with Large Graphite Particles, MAKINOVA 2013, Skopje, Macedonia, 15-19 October 2013

2013 Silver medal. Ilija Bobic, Biljana Bobic, Miroslav Babic, Aleksandar Vencl, Slobodan Mitrovic, Razvoj domaćih črstičnih hibridnih kompozita A356/SiC + grafit, sa krupnim česticama grafita, 11. Medjunarodna izložba inovacija ARCA 2013, Zagreb, Croatia, 2-5 October 2013

2013 Golden medal. I. Bobić, B. Bobić, M. Babić, A. Vencl, S. Mitrović, Development of Domestic Hybrid Composites  A356/SiCp/Grp with Large Graphite Particles, Innovation 2013 IIIC Fourth International Poster Contest Invention, Taipei, Taiwan, December 2013

2011 Bronze medal. B. Bobić, A. Vencl, M. Babić, S. Mitrović, I. Bobić, Kompoziti sa dobrom otpornošću na habanje dobijeni infiltracijom čestica silicijum-karbida (SiC) i čestica grafita u osnovu od aluminijumske legure A356, 31. međunarodna izložba pronalazaka, novih tehnologija i industrijskog dizajna Pronalazaštvo–Beograd 2011, Belgrade, Serbia, 23-27 May 2011

2009 Bronze medal. B. Bobić, N. Bajić, Z. Aćimović–Pavlović, M. Rakin, I. Bobić, Kompoziti sa osnovom od ZA27 legure ojačanom česticama silicijum-karbida (SiC), otporni prema koroziji, 29. Međunarodna izložba pronalazaka, novih tehnologija i industrijskog dizajna Pronalazaštvo–Beograd 2009, Belgrade, Serbia, 18-22 May 2009

Research Interests:

Corrosion of metals and alloys and their welded joints; Corrosion of micro/nano composites with metal matrix; Protection against corrosion using metallic coatings, non-metallic inorganic coatings and organic coatings

Citations: 210, without self-citations (January 2017)

Language Skills: English, French

Projects: International:
2016 – 2018 EUREKA E!9983 PF + Weld Corrosion

Basic Research: 

Applied Research:

2007 – 2008 Development of technology for preparation of universal agglomerated powder for submerged arc welding, EVB 451-01-02960/2006-46, MESTD RS
2007 – 2008 Modified Pb–Ag–Ca alloys for electrode bars in lead batteries and for anodes in hydrometallurgy, EVB 451-01-02960/2006-44, MESTD RS
2008 – 2010 Investigation of optimal composition of metal components and low-molecular hydrophobic compounds for development of new metallurgical quality of cored wire for welding steels intended for operation at low temperatures, TR 19061, MESTD RS
2008 – 2010 Development of electrochemical production of ferrates (FeO42-, FeO43-), strong oxidizing and environmentally safe agents, TR 19029, MESTD RS
2011 – 2015 Technology development for production of core and coating for special coated electrodes intended for arc welding of steels, based on domestic raw materials, TR 34016, MESTD RS
2011 – 2015 Development of tribological micro/nano two-component and hybrid self-lubricating composites, TR 35021, MESTD RS 

Other:

2017 - 2018 Innovation project Development of innovative laser procedure for cleaning copper and copper alloys, EVB 391-00-16 / 2017-16 / 38 Type1, MESTD RS

Major Publications: Monographs and Chapters:

Published papers:

  1. Bobic, A. Vencl , J. Ruzic, I. Bobic, Z. Damnjanovic, Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting, Journal of Composite Materials (2018) https://doi.org/10.1177/0021998318817876
  2. Jegdić, B. Bobić, B. Radojković, B. Alić, Lj. Radovanović, Corrosion resistance of welded joints of X5CrNi18-10 stainless steel, Journal of Materials Processing Technology 266 (2019) 579-587
  3. V. Jegdić, B. M. Bobić, B. M. Radojković, .B. Alić, Influence of the welding current intensity and nitrogen content on the corrosion resistance of austenitic stainless steels, Materials and Corrosion 69 (2018) 1758-1769
  4. V. Jegdić, B. M. Bobić, B. M. Radojković, B. Alić, Influence of welding parameters on pit initiation and pit growth in welded joints of X5CrNi18-10 stainless steel, Welding in the World (2018) https://doi.org/10.1007/s40194-018-0644-0
  5. Vencl, . B. Bobić, F. Vučetić, P. Svobod, V. Popović, I. Bobić, Effect of Al2O3 nanoparticles and strontium addition on structural, mechanical and tribological properties of Zn25Al3Si alloy, Journal of the Brazilian Society of Mechanical Sciences and Engineering (2018) https://doi.org/10.1007/s40430-018-1441-9
  6. Vencl, F. Vučetić, B. Bobić, J. Pitel, I. Bobić, Tribological characterisation in dry sliding conditions of compocasted hybrid A356/SiCp/Grp composites with graphite macroparticles, The International Journal of Advanced Manufacturing Technology (2018) https://doi.org/10.1007/s00170-018-2866-0
  7. Bobić, J. Bajat, I. Bobić, B. Jegdić, Corrosion influence on surface appearance and microstructure of compo cast ZA27/SiCp composites in sodium chloride solution, Transactions of Nonferrous Metals Society of China 26 (6) (2016) 1512-1521
  8. Bobić, J. Ružić, B. Bobić, M. Babić, A. Vencl, S. Mitrović, Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles, Materials Science & Engineering A 612 (2014) 7-15
  9. Vecl, I. Bobić, F. Vučetić, B. Bobić, J. Ružić, Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition, Materials and Design 64 (2014) 381-392
  10. Bobić, M. Babić, A. Vencl, B. Bobić, S. Mitrović, Artificial aging of thixocast ZA27 alloy and particulate ZA27 /SiCp composites, Journal of Materials Research (formerly Z. Metallkd.) 104 (2013) 954-965
  11. Bobić, J. Bajat, Z. Aćimovic-Pavlović, I. Bobić, B. Jegdić, Corrosion behaviour of thixoformed and heat-treated ZA27 alloys in NaCl solution, Transactions of Nonferrous Metals Society of China 23 (2013) 931-941
  12. Bobić, J. Bajat, Z. Aćimović-Pavlović, M. Rakin, I. Bobić, The effect of T4 heat treatment on the microstructure and corrosion behaviour of Zn27Al1.5Cu0.02Mg alloy, Corrosion Science 53 (2011) 409-417
  13. Bajić, V. Šijački-Žeravčić, B. Bobić, D. Čikara, M. Arsić, Filler Metal Influence on Weld Metal Structure of Microalloyed Steel, Welding Journal 90 (4) (2011) 55-62
  14. Aćimović–Pavlović, K.T. Raić, I. Bobić, B. Bobić, Synthesis of ZrO2 Particles Reinforced ZA25 Alloy Composites by Compocasting Process, Advanced Composite Materials 20 (2011) 375-384
  15. Bobić, M. Babić, S. Mitrović, N. Ilić, I. Bobić, M. T. Jovanović, Microstructure and mechanical properties of Zn25Al3Cu based composites with large Al2O3 particles at room and elevated temperatures, International Journal of Materials Research (formerly Z. Metallkd.) 101 (2010) 1524-1531
  16. Vencl, I. Bobić, S. Arostegui, B. Bobić, A. Marinković, M. Babić, Structural, mechanical and tribological properties of A356 aluminium alloy reinforced with Al2O3, SiC and SiC + graphite particles, Journal of Alloys and Compounds 506 (2010) 631-639

Conference and Proceedings Papers:

  1. M. Radojković, B. V. Jegdić, S. S. Ristić, B. M. Bobić, S. R. Polić, Corrosion characteristics of laser cleaned brass surfaces, 8th International Scientific Conference on Defensive Technologies OTEH 2018, Belgrade, Serbia, 11-12 October 2018, pp 456-461
  2. Bobić, Corrosion of Metal Matrix Composites, International Conference XVIII YuCorr, Tara Mountain, Serbia, 12-15 April 2016, pp 55-64
  3. Bobić, I. Bobić, A. Vencl, M. Babić, S. Mitrović, Corrosion behavior of compocasted ZA27/SiCp composites in sodium chloride solution, 14th International Conference on Tribology Serbiatrib '15, Belgrade, Serbia, 13-15 May 2015, pp 65-72
  4. Vencl, .I. Bobić, F. Vučetić, B. Bobić, M. Kandeva, The influence of strontium addition on the tribological properties of Zn25Al3Si alloy in boundary lubricated condition, International conference of materials, tribology, recycling MATRIB 2014, Vela Luka, Croatia, 26-28 June 2014, pp 609-616
  5. Bobić, A. Vencl, M. Babić, S. Mitrović, I. Bobić, The Influence of Corrosion on the Microstructure of Thermally Treated ZA27/SiCp Composites, 13th International Conference on Tribology Serbiatrib ′13, Kragujevac, Serbia, 15-17 May 2013, pp 106-112
  6. Bobić, M. Babić, A. Vencl, S. Mitrović, B. Bobić, Veštačko starenje tiksolivene ZA27 legure i čestičnih ZA27/SiC kompozita, 13th International Conference on Tribology Serbiatrib ′13, Kragujevac, Serbia, 15-17 May 2013, pp 409-413
  7. Jegdić, A. Alil, B. Bobić, M. Radosavljević, V. Mišković-Stanković, Corrosion testing of an Al-Zn-Mg-Cu Alloy after Different Heat Treatment Regimes by the Application of Electrochemical methods, 5th International Scientific Conference on Defensive Technologies OTEH 2012, Belgrade, Serbia 18-19 September 2012, pp 588-593
  8. Alil, B. Jegdić, B. Bobić, M. Radosavljević, B. Katavić, Stress Corrosion Cracking of an Al-Zn-Mg-Cu Alloy after Different Precipitation Hardening Treatments, 5th International Scientific Conference on Defensive Technologies OTEH 2012, Belgrade, Serbia, 18-19 September 2012, pp 582-587
  9. Alil, B. Jegdić, B. Bobić, M. Ristić, Corrosion behaviour of an Al-Zn-Mg-Cu alloy after different heat treatments, II International Conference Industrial Engineering and Environmental Protection 2012 (IIZS 2012), October 31st 2012, Zrenjanin, Serbia, pp 121-128
  10. Bobić, S. Mitrović, M. Babić, A. Vencl, I. Bobić, Corrosion Behavior of the As-cast and Heat-treated ZA27 Alloy, 12th International Conference on Tribology Serbiatrib ’11, Kragujevac, Serbia, 11-13 May 2011, pp 91-97
  11. Bobić, M. Babić, S. Mitrović, A. Vencl, B. Bobić, Uticaj temperature na mehaničke karakteristike čestičnih ZA27/Al2O3 kompozita, , 12th International Conference on Tribology Serbiatrib ’11, Kragujevac, Serbia, 11-13 May 2011, pp 412-417
  12. Odanović, B. Bobić, V. Grabulov, B. Katavić, M. Arsić, Investigation of the light weight ceramics/metal composite armour protection capabilities, LWAG 2011 Aveiro Conference, New design concepts in light-weight armour for vehicles, Aveiro, Portugal, 27-28 October 2011
  13. Bajić, M. Simičić, B. Bobić, B. Petrovski, D.Veljić, Analysis of Influence of Filler Metal Composition on the Quality of Welded Joints of Micro-Alloyed Steel, II International Congress Engineering, Ecology and Materials in the Processing Industry, Jahorina, Republika Srpska, 9-11 March 2011, pp 1164-1175
  14. I. Bobić, M. Babić, S. Mitrović, B. Bobić, M. T. Jovanović, Rheological Behavior of ZA27 Alloy Semi-Solid Slurries and Al2O3 Particulate/ZA27 Composite Slurries, 3rd International Conference on Manufacturing Engineering (ICMEN), Chalkidiki, Greece, October 2008, pp 363-372

Personal WEB page: http://www.researcherid.com/VerifyURL.action?id=frsMnQogejps5hXXW%2FgXnM9COZ2nWgJ3MIylI9cVpA1sqV8X%2B1zpoZbc29diLufR

Department of Electrochemistry

Contact

centar za elektrohemiju

Department of Electrochemistry

Address:
Njegoševa 12,
P. fah 473
11000 Belgrade 6
PAK 125213
Phones:
Centrala: +381 11 3640 232;
Director of Center: (Ph.D. Vladimir Panić): +381 11 3640-231;
Fax: +381 11 3640-234

e-mail:
panic@ihtm.bg.ac.rs    

Labs:
Karnegijeva 4/III, Belgrade, office 305
phone/fax: +381 11 3370 389,
phone: +381 11 3370 390;

Njegoševa 12, Beograd, office 26
phone/fax: +381 11 3640 234;
phone: +381 11 3370 231;

e-mail:
m.avramov.ivic@ihtm.bg.ac.rs (dr Milka Avramov Ivić, 
Šef laboratorije 305)
svetlana.strbac@ihtm.bg.ac.rs (dr Svetlana Štrbac, elektrokataliza)
jelena.lovic@ihtm.bg.ac.rs (dr Jelena Lović, elektrohemijski senzori)
sanjas@ihtm.bg.ac.rs (dr Sanja Stevanović, elektronska mikroskopija)
v.cvetkovic@ihtm.bg.ac.rs (dr Vesna Cvetković, Šef laboratorije 26)
mpavlovic@ihtm.bg.ac.rs (dr Miroslav Pavlović, elektroprovodni i elektroaktivni materijali, ac impedancija)

website
elchem.ihtm.bg.ac.rs